Cisco Automatic Gain Control Modules テクニカルリファレンス

Program Mode,

Continued

Testing phase

The table below indicates the functions you can perform when you are in the Test

phase.

Secondary

Menu Item

Function

Test

This phase allows you to test the following characteristics of the

handheld controller.

Test RAM

The YES/NO option tests the RAM

which is a small part of U113.
Note: The result is indicated by

PASS/FAIL.

Test ROM

The YES/NO option executes a check

test on the EPROM (U108).
Note: The result is indicated by

PASS/FAIL.

Test EEPROM

The YES/NO option erases and rewrites

each word on the EEPROM (U108).
Note: The result is indicated by

PASS/FAIL.

Compliance criteria

The handheld controller may display unrecognizable characters due to an

electrostatic discharge (ESD) event, especially a discharge on the top part where the

interface cable is connected. The user should disconnect and reinsert the interface

cable from the equipment that is being accessed. This resets the handheld controller

so that it may resume its function.

Cisco Systems, Inc.

5030 Sugarloaf Parkway, Box 465447

Lawrenceville, GA 30042

678 277-1120

800 722-2009

www.cisco.com

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates

in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL:

Third party trademarks mentioned are the property of their respective owners.

The use of the word partner does not imply a partnership relationship between Cisco and any

August 2012 Printed in USA

Part Number 573109 Rev C