Cisco DNCS System Release 2.7 3.7 4.2 デザインガイド

ページ / 182
 
About This Guide 
vi 
78-4001708-01 Rev B 
 
Verify the host ID number 
 
Verify the ECM and EMM counts 
 
Determine if there has been a decryption failure, and if so, when it occurred 
 
Determine the customer service number you need to start service 
 
Verify the current copy protection authorization 
 
 
Audience 
This guide is written for cable system operators, service providers, and Cisco 
personnel who have experience with accessing the SARA-based diagnostic screens 
for Explorer DHCTs. 
 
Related Publications 
You may find the following publications useful as resources when you implement 
the procedures in this document. Check the copyright date on your resources to 
assure that you have the most current version. The publish dates for the following 
documents are valid as of this printing. However, some of these documents may 
have since been revised: 
 
Best Practices for Using Multi-Stream CableCARD Modules (part number 4005658, 
expected publish date: mid-year 2007) 
 
Explorer
®
 Digital Home Communications Terminal Staging Guide (part number 
734375, published August 2006) 
 
Explorer
®
 Digital Home Communications Terminal Troubleshooting Guide (part 
number 717867, published June 2002) 
 
Setting Up the PowerKEY
®
 CableCARD™ and M-Card™ Modules on the DNCS for 
System Releases 2.5/3.5 and 4.0 (part number 4011765, published November 2006) 
 
Setting Up PowerKEY
®
 CableCARD™ and M-Card™ Modules on the DNCS for 
System Releases 2.7/3.7 and 4.2 (part number 4014667, published July 2007) 
 
Document Version 
This is the second release of this document.