Cisco Cisco 1 GHz GainMaker Amplifier データシート
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 7
Required Accessories
Part Number
Plug-in Signal Director for Auxiliary output: 1 required, chose from the following:
● Jumper
● Two-Way Splitter
● DC-8 Directional Coupler
● DC-12 Directional Coupler
● Two-Way Splitter
● DC-8 Directional Coupler
● DC-12 Directional Coupler
GM-SD-1.2G-JMP=
GM-SD-1.2G-SPLT=
GM-SD-1.2G-DC8=
GM-SD-1.2G-DC12=
The optional accessories listed in Table 8 can be ordered separately.
Table 9.
Optional Accessories
Optional Accessories
Part Number
24V Power Supply for Cisco GainMaker AMPs
4026157
230 VAC Crowbar Surge Protector (plug-in, one per station)
715973
Plug-in Inverse Equalizer: Simulates cable equivalent tilts (creates tilt opposite that of
equalizers). Use in place of forward input EQ as needed to maintain proper output tilt in
short spaced locations. Available in 1.5dB cable-equivalent steps from 1.5 to 21.0dB
equalizers). Use in place of forward input EQ as needed to maintain proper output tilt in
short spaced locations. Available in 1.5dB cable-equivalent steps from 1.5 to 21.0dB
GM-EQIN-1.2G-1.5= sequentially thru GM-
EQIN-1.2G-21=
EQIN-1.2G-21=
Long Reach Test Point Adapter
562580
Cisco GainMaker SA HGD Split Kit 85/105 MHz (PKG OF 10)
TBD
Status Monitoring Transponder
Refer to the Cisco GainMaker Status
Monitoring Transponder Data Sheet.
Monitoring Transponder Data Sheet.
Cisco
1 800 722-2009 or 678 277-1120
Printed in USA
C78-736468-00 02/16