Cisco DNCS System Release 2.7 3.7 4.2 インストールガイド
Appendix E
ROM Naming Conventions and Image Versions
108
78-4003052-01 Rev G
Example 1
Your Doctor report results are as follows:
Your Doctor report results are as follows:
2000 10 00:02:de 7
15903006pe2_31151.ver
2000 13 00:02:de 7
15806001pe2_31131.ver
2000 15 00:02:de 2
15806001pe2_31131.ver
2000 16 00:02:de 1
2000 20 00:02:de 24 159osm310.ver
2000 21 00:02:de
815423001pe2_31091002.ver
2000 37 00:02:de 5
15806001pe2_31131.ver
2005 10 00:02:de 1
2010 30 00:02:de 47
Looking at the first line of these results, you can see that your system is using
Explorer 2000 DHCTs, with revision 1.0 (the report does not display decimals in
revision numbers). Looking at the ROM to Model Matrix (on page 109), you can see
that this DHCT revision requires the files with a pe2 as part of the file name, and that
these DHCTs only support the OSM download method. Therefore, you would need
to load the following three files on the OS list for those DHCTs to load software:
15904a020pe2_31151.ver
15904a020pe2_0
15904a020pe2_1
Example 2
Your Doctor report results are as follows:
Your Doctor report results are as follows:
3200 11 00:02:de 7
3200 12 00:02:de 6
3250 11 00:02:de 3
3270 13 00:02:de 1
3340 20 00:02:de 50
Looking at the first two lines of these results, you can see that your system is using
Explorer 3200 DHCTs with revisions 1.1 and 1.2, and that these DHCTs only support
the CVT download method. Looking at the ROM to Model Matrix (on page 109),
you can see that these DHCT revisions require the file with a pe7m as part of the file
name, as shown below.
15904a020pe7m.rom
Only one file is listed with pe7 as part of the name because these DHCTs only
support the CVT download method. You need to use the unified image file listed
above for the CVT downloads to these DHCTs.