Cisco DNCS System Release 2.7 3.7 4.2 インストールガイド
2-2
Install and Configure the Digital System Time Kit to Use the
78-4011510-01 Rev C
Global Positioning System
Verify Time Zone Settings
Introduction
Before installing the Digital System Time Kit, you must verify that the time zone
setting and the current date and time is correct for your DNCS. This section provides
a procedure for verifying your DNCS time zone setting and for updating the current
date and time (if necessary).
Verifying the DNCS Time Zone Setting
Follow these steps to verify that the time zone setting is correct for your DNCS.
1.
At the DNCS Administrative Console window, click the DNCS tab and then
click the Utilities tab.
2.
Click xterm.
Result: The xterm window opens.
Result: The xterm window opens.
3.
At the $ prompt, type date and then press Enter.
Result: The current date, time, and time zone of your DNCS displays on the
Result: The current date, time, and time zone of your DNCS displays on the
screen.
Example:
Mon Jan 29 8:59:50 EST 2007
•
Example:
Mon Jan 29 8:59:50 EST 2007
•
EST/EDT = Eastern Standard Time/Eastern Daylight Time
•
CST/CDT = Central Standard Time/Central Daylight Time
•
MST/MDT = Mountain Standard Time/Mountain Daylight Time
•
PST/PDT = Pacific Standard Time/Pacific Daylight Time
•
HST/HDT = Hawaii Standard Time/Hawaii Daylight Time
4.
Is the time zone setting correct for your DNCS?
•
•
If yes, go to step 5.
•
If no, contace Cisco Services for assistance with correcting the time zone
setting in your DNCS.
5.
Does the date and time accurately match the current date and time?
•
•
If yes, go to step 7.
•
If no, go to step 6.
Continued on next page