Cisco Cisco RF Gateway 1

Cisco RF Gateway 1 Software 
Release Notes, Release 3.00.18 

 

The RF Gateway 1 software version 3.00.18 provides higher channel capacity with 
no hardware changes from its predecessor releases. The RF Gateway 1 remains 
fully SDV capable and the new 3.00.18 system release is primarily intended for 
support of SDV applications. Other video deployments can continue to use 
2.02.XX and so forth as the preferred release.  

The purpose of this document is to notify RF Gateway 1 users of the 
enhancements included in the current release, and inform users of any special 
upgrade procedures needed for using Release 3.00.18. 

This document is intended for system engineers or managers responsible for 
operating and/or maintaining this product. 

Refer to the following documents for additional information regarding hardware 
and software. 

  

Cisco RF Gateway 1 Configuration Guide, part number 4025112 

  

Cisco RF Gateway 1 System Guide, part number 4024958 

If this document discusses software, the software described is used to monitor 
and/or control ours and other vendors' electrical and optical equipment designed 
to transmit video, voice, or data signals. Certain safety precautions should be 
observed when operating equipment of this nature.