Cisco Cisco StadiumVision Director メンテナンスマニュアル
© 2012 Cisco Systems, Inc. All rights reserved.
Page 12 of 103
DMP 4310G IR Remote
Figure 5.
Cisco 4310G DMP IR Remote
IR Remote Button Map
Port
Usage
Power Button
Turns power to the DMP 4310G on/off. This is a latching push button.
Reset Button
Resets the DMP to factory defaults.
HDMI Output Port
19-pin HDMI 1.1, supporting up to 1080 p, progressive and interlaced video
S-Video
Component and
Composite
Component and
Composite
7-pin S-Video port supports S-Video, Component and Composite video output.
The S-Video port accepts a standard 4-pin S-Video cable for S-Video output.
Component and Composite video output require a proprietary cable.
The S-Video port accepts a standard 4-pin S-Video cable for S-Video output.
Component and Composite video output require a proprietary cable.
USB Ports
Connect to a USB device for additional ad or other storage. There is 32 GB
onboard storage for the DMP 4310G.
onboard storage for the DMP 4310G.
IR Extender
3.5 mm IR Receiver Extension. Connects to the included IR Extender to extend
IR control. This is used in situations where the DMP is mounted behind the TV
such that the IR sensor is not visible.
IR control. This is used in situations where the DMP is mounted behind the TV
such that the IR sensor is not visible.
Unbalanced audio
connector
connector
3.5 mm stereo jack that provides an audio connection.
RS-232 Port
3.5 mm jack for the included RS-232 cable for TV control.
Console Port
(debug)
(debug)
RJ-45 serial port for connecting to a console PC terminal. Cisco TAC use only
and requires a special cable. The port does not work like a Cisco IOS Router
console port.
and requires a special cable. The port does not work like a Cisco IOS Router
console port.
Ethernet Port
10/100 Mbps RJ-45 Ethernet port
Power Port
12V, 3 amp power input. Connects the DMP 4310G to power. Note that the
voltage and amperage rating for this port is different than the DMP 4305G power
port. Therefore do not connect a DMP 4305G power supply to this port.
voltage and amperage rating for this port is different than the DMP 4305G power
port. Therefore do not connect a DMP 4305G power supply to this port.