Cisco Cisco StadiumVision Director メンテナンスマニュアル
© 2012 Cisco Systems, Inc. All rights reserved.
46
Review and Recover DMP Health (continued)
NOTE: BY DEFAULT ALL DMPS ARE SELECTED. BE SURE TO SELECT
ONLY THE DMPS ON WHICH YOU WANT TO TAKE ACTION.
§
If a critical DMP can be pinged and shows as compliant, reboot the device.
§
If a critical DMP can be pinged and shows as non-compliant, re-push the Flash template
to the DMP from the Cisco StadiumVision Director Control Panel.
to the DMP from the Cisco StadiumVision Director Control Panel.
This is the most common non-compliance for DMPs that have been up and running for a while. If the
device remains non-compliant you will need to investigate further from the Compliance tab. You may
need to run additional DMP Install commands from the dashboard.
device remains non-compliant you will need to investigate further from the Compliance tab. You may
need to run additional DMP Install commands from the dashboard.
§
If a critical DMP is unreachable, perform a Power over Ethernet (PoE) reboot. If PoE
reboot is not functioning at your stadium, contact Cisco Technical Support.
reboot is not functioning at your stadium, contact Cisco Technical Support.
§
If the DMP is unrecoverable after these steps, go to the DMP and manually power off/on
and continue to troubleshoot further.
and continue to troubleshoot further.