Cisco Cisco StadiumVision Director メンテナンスマニュアル
© 2011 Cisco Systems, Inc. All rights reserved.
Page 12 of 40
Figure 3.
Restarting Flash
Enabling/Disabling DHCP
Send the DMP Commands > DHCP Enable and DHCP Disable commands to
enable/disable DHCP on the selected DMP(s). There are no command parameters to
set for the Enable DHCP or Disable DHCP commands.
enable/disable DHCP on the selected DMP(s). There are no command parameters to
set for the Enable DHCP or Disable DHCP commands.
Updating MIB Settings
To update MIB settings for a DMP(s):
1. Select DMP Commands > Update MIB.
2. Select the DMP(s) from the Device List.
3. Click the green plus sign button at the bottom of the command parameters to add
a new MIB variable.
4. Click the appropriate command parameter tab (common, 4305 Parameters or
4310 Parameters) and type the MIB variable and value.
5. Click the Play button in the Main panel to apply and update MIB values for the
selected DMP(s).
Refer to the Management Dashboard MIB Variables Guide for a listing of the MIB
Variables modified by the Dashboard.
Variables modified by the Dashboard.