Cisco Cisco 1 GHz GainMaker Amplifier インストールガイド
Before You Begin
Fastener
Torque Specification
Illustration
Test point port plugs
5 ft-lb to 8 ft-lb
(6.8 Nm to 10.8 Nm)
Amplifier Module Cover
GainMaker Line Extender modules have an aluminum cover attached to the chassis with
self-tapping screws. Normal field maintenance will not require the removal of this cover.
Module and Housing Compatibility
Housing Lid
The GainMaker Line Extender module is compatible with the GainMaker Line Extender
housing lid only. The amplifier will not work with Line Extender II or III housing lids.
Housing Base
The GainMaker Line Extender module is compatible with the GainMaker Line Extender
housing base. The amplifier will also work with Line Extender II or III housing bases.
Important! GainMaker Line Extender modules are marked with a blue label to indicate
15-ampere capability. The RF connectors in these modules are also marked with blue.
These amplifier modules must be used in conjunction with the proper GainMaker
amplifier housings, which are also marked with a blue label.
Note: 15-ampere capable Line Extender III housings with the blue label and Line
Extender II housings that have been upgraded to 15-ampere capability with an available
seizure upgrade kit are compatible with GainMaker Line Extender modules.
Housing Dimensions
The diagram below shows the dimensions, in inches and millimeters, of the GainMaker
Line Extender housing. Use these measurements to calculate clearance requirements for
your installation.
OL-31155-01
13