Cisco Cisco 1 GHz GainMaker Amplifier インストールガイド
3
Before You Begin
Before You Begin
Before you start the upgrade procedure, make sure you have all the components,
tools, and equipment ready.
tools, and equipment ready.
Components Required to Make the Split Change
Note: Part numbers differ depending on desired final split.
(1) Reverse Amplifier PWB Assembly
(1) High Pass Filter Trim PWB Assembly
(1) Low Pass Filter Trim PWB Assembly
(1) Mirrored Diplex Filters
(1) Non-mirrored Diplex Filters
Part number label
Tools and Equipment Required to Make the Split Change
1/2-inch socket driver
Torx T-15 screwdriver
Cross screwdriver
Flat-head screwdriver
Torque wrench with 1/2-inch socket