Cisco Cisco Prisma II EDR Receiver インストールガイド
4-24
Operation Using LCI
78-713378-01 Rev C
Configuring the Reverse Receiver,
Continued
2.
Under Controls, double-click the parameter you want to configure.
Result: The Change Value dialog box displays. The graphic below shows the
Result: The Change Value dialog box displays. The graphic below shows the
dialog box for the Rx 1 Mute Switch parameter.
3.
Depending on the parameter you chose, select or type a new value.
4.
Click Execute.
Result: The new value displays next to the parameter.
Result: The new value displays next to the parameter.