Cisco Cisco OptoStar II 1550nm Transmitter インストールガイド
Operating using ICIM LCD, Continued
Sub-Menu 3 -- Channel Control
The illustration below shows sub-menu 3 of the OptoStar II RF switch module –
Channel Control.
Channel Control.
Factory default sets switching mode to Auto. By default, the cursor is set on the
Auto option and the module is set to work in auto switching mode. Press ▲▼
button to select auto or manual switching mode.
Auto option and the module is set to work in auto switching mode. Press ▲▼
button to select auto or manual switching mode.
•
To select automatic switching mode
1. Press ▲▼ button to keep the symbol on “Auto” option;
2. Press ► button to move the cursor to “Set”;
3. Press SET button to save the configuration.
2. Press ► button to move the cursor to “Set”;
3. Press SET button to save the configuration.
•
To select manual switching mode
1. Press ▲▼ button to keep the symbol on Manual option;
2. Press ► button to move the cursor to “Set”;
3. Press SET button to start the configuration;
2. Press ► button to move the cursor to “Set”;
3. Press SET button to start the configuration;
To switch between channel A and B manually, “Manual” must be selected in the
Mode Selection screen, otherwise channel switching will be unavailable in auto
switching mode.
Mode Selection screen, otherwise channel switching will be unavailable in auto
switching mode.
1. Press ▲▼ button to keep the symbol on Channel A or Channel B option;
2. Press ► button to move the cursor to “Set”;
3. Press SET button to save the configuration.
2. Press ► button to move the cursor to “Set”;
3. Press SET button to save the configuration.
Continued on next page
3-10
Operation
OL-29669-02