Cisco Cisco Intelligent Automation for Cloud 4.3.2 ユーザーガイド
54
Setting Up the Infrastructure
Setting Provisioning Settings
f.
System Health Check. Setting for performing platform element connection validation services. (ON or OFF)
g.
Cloud Domain. Enter the domain name.
h.
Cloud Domain User. Enter the cloud domain user name.
i.
Cloud Domain Password. Enter the domain user's password.
j.
Verify Cloud Domain Password. Re-enter the domain user’s password.
Note:
for details.
k.
Cloud Default Time Zone Linux. Choose the default time zone for Linux.
l.
Cloud Default Time Zone Windows. Choose the default time zone for Windows.
m.
Order Status History Cleanup. Choose Yes/No for enabling/disabling Order Status History Cleanup.
n.
System Health History Grooming. Choose Yes/No for enabling/disabling System Health History Grooming.
Network Services Settings
Enter the following in the Network Services Settings section:
a.
NTP Server. Be sure NTP server entered matches up with the Server Configured Network services controller.
b.
Routing Protocol. Choose a Routing Protocol to be used for routing external network traffic.
c.
Process Orchestrator Network (subnet). Enter network address for configuring the static route between virtual
network devices and Cisco Process Orchestrator.
network devices and Cisco Process Orchestrator.
d.
Process Orchestrator Network (subnet mask). Enter subnet mask for configuring the static route between
virtual network devices and Cisco Process Orchestrator.
virtual network devices and Cisco Process Orchestrator.
e.
IP Address Source. Specifies whether IP Address Management will be handled by the Service Portal or by an
External IPAM system.
External IPAM system.
f.
Username is entered by the system.
g.
Enter the Password and re-enter the password.
h.
WAN Router(s). When enabled, the system will require ASN and BGP configuration information for a pair of ASRs,
operating in an HA cluster. Options are Single ASR, HA Cluster, and Standalone.
operating in an HA cluster. Options are Single ASR, HA Cluster, and Standalone.
i.
Ping Sweep. Controls whether ICMP echo requests are sent to every IP address within a subnet range as
networks are added to the system. When an ICMP response is received, the corresponding IP address will be
marked as assigned.
networks are added to the system. When an ICMP response is received, the corresponding IP address will be
marked as assigned.
Single or HA Cluster Details
In the Single or HA Cluster Details section (the necessary network settings used to create Advanced Network Services),
enter the following:
enter the following:
a.
Provider Internet AS Number. Enter Autonomous System Number (ASN) for Internet Network.
b.
Provider Enterprise AS Number. Enter Autonomous System Number (ASN) for Enterprise Network.
c.
Tenant AS Number. Enter Autonomous System Number (ASN) for Tenant Network.
d.
EInternet Gateway.
e.
Internet Remote BGP Peer IP.