Cisco Cisco ASA 5555-X Adaptive Security Appliance
About the ASA REST API v1.1.1
REST Agent in ASA
REST Agent in ASA
12
Use this command to enable the REST API Agent residing on ASA. This config command is slightly different from other
config commands:
• This config is saved in a separate file on flash, not in the startup config file.
• Once enabled, "clear configure" will not clear this config.
• To disable, use the "no" form of the command.
Syntax & Help message:
agent Use this keyword to enable the REST API Agent on ASA.
Supported Modes:
single/multi-context, routed/transparent
Output of Show Commands:
"The REST API Agent is currently enabled"/"The REST API Agent is currently disabled"
Another way to find out if the REST API Agent is enabled is by issuing the command show version:
Version info for REST agent
The "show version" output will be modified when REST API Agent is enabled.
CLI:
Saleen6(config)# show version
Cisco Adaptive Security Appliance Software Version 100.10(0)84
REST API Agent Version <version number>
Syslogs
REST API Install Syslogs
Syslog #1
Description/Rationale/Overview:
The REST API image has been successfully installed.
Default Level:
7
Syslog Number and Format:
%ASA-7-342005: REST API image has been installed successfully.