Cisco Cisco Web Security Appliance S670 ユーザーガイド
B-2
AsyncOS 9.2 for Cisco Web Security Appliances User Guide
Appendix B Command Line Interface
Accessing the Command Line Interface
Subsequent Access
You can connect and log into the appliance at any time, using a valid user name and passphrase. Note
that a listing of recent appliance access attempts, both successes and failures, for the current user name
is displayed automatically upon log-in.
that a listing of recent appliance access attempts, both successes and failures, for the current user name
is displayed automatically upon log-in.
See the following
userconfig
command description, or
for
information about configuring additional users.
Working with the Command Prompt
The top-level command prompt consists of the fully qualified hostname, followed by the greater than (
>
)
symbol, followed by a space. For example:
When running commands, the CLI requires input from you. When the CLI is expecting input, the prompt
displays the default values enclosed in square brackets (
displays the default values enclosed in square brackets (
[]
) followed by the greater than (
>
) symbol.
When there is no default value, the brackets are empty.
For example:
When there is a default setting, the setting is displayed within the command-prompt brackets. For
example:
example:
When a default setting is shown, typing Return is equivalent to accepting the default:
Command Syntax
When operating in the interactive mode, the CLI command syntax consists of single commands with no
white space and no arguments or parameters. For example:
white space and no arguments or parameters. For example:
example.com>
example.com> routeconfig
Choose a routing table:
- MANAGEMENT - Routes for Management Traffic
- DATA - Routes for Data Traffic
[]>
example.com> setgateway
Warning: setting an incorrect default gateway may cause the current connection
to be interrupted when the changes are committed.
Enter new default gateway:
[172.xx.xx.xx]>
example.com> logconfig