Cisco Cisco Content Security Management Appliance M1070 ユーザーガイド
13-3
Cisco IronPort AsyncOS 8.0 for Security Management User Guide
Chapter 13 Common Administrative Tasks
Feature Key Settings Page
Use the Management Appliance > System Administration > Feature Key Settings page to control
whether the appliance checks for and downloads new feature keys, and whether or not the keys are
automatically activated.
whether the appliance checks for and downloads new feature keys, and whether or not the keys are
automatically activated.
Expired Feature Keys
If the feature key for the feature you are trying to access has expired, contact your Cisco representative
or other customer support organization.
or other customer support organization.
Performing Maintenance Tasks Using CLI Commands
The operations and commands described in this section enable you to perform maintenance-related tasks
on the Security Management appliance. This section describes the following operations and commands:
on the Security Management appliance. This section describes the following operations and commands:
•
shutdown
•
reboot
•
suspend
•
offline
•
resume
•
resetconfig
•
version
Shutting Down the Security Management Appliance
To shut down your Security Management appliance, use the Management Appliance > System
Administration > Shutdown/Reboot page, or use the shutdown command at the command line prompt.
Administration > Shutdown/Reboot page, or use the shutdown command at the command line prompt.
Shutting down an appliance exits AsyncOS, which allows you to safely power down the appliance. You
may restart the appliance at a later time without losing any messages in the delivery queue. You must
enter a delay for the appliance to shut down. The default delay is 30 seconds. AsyncOS allows open
connections to complete during the delay, after which it forcefully closes open connections.
may restart the appliance at a later time without losing any messages in the delivery queue. You must
enter a delay for the appliance to shut down. The default delay is 30 seconds. AsyncOS allows open
connections to complete during the delay, after which it forcefully closes open connections.
Rebooting the Security Management Appliance
To reboot your Security Management appliance, use the Shutdown/Reboot page available on the System
Administration menu in the GUI, or use the r
Administration menu in the GUI, or use the r
eboot
command in the CLI.
Rebooting your appliance restarts AsyncOS, which allows you to safely power down and reboot the
appliance. You must enter a delay for the appliance to shut down. The default delay is 30 seconds.
AsyncOS allows open connections to complete during the delay, after which it forcefully closes open
connections. You may restart the appliance without losing any messages in the delivery queue.
appliance. You must enter a delay for the appliance to shut down. The default delay is 30 seconds.
AsyncOS allows open connections to complete during the delay, after which it forcefully closes open
connections. You may restart the appliance without losing any messages in the delivery queue.