Zigor Tamesis 18147 プリント

 

 

Non Stop Power

• Workstations

• Telecommunications

• Networking

• Security

• Domestic use

• Data centres

• Industrial market

APPLICATIONS

ADVANTAGES

• UPS digital on-line double conversion

• Integral microprocessor control

• Power: 10,15, 20, 30, 40 & 50 kVA 

• Galvanic insulation by output 

transformer

• Output connections: Bornes   

    

• Output wave: pure sinusoidal

• Acoustic and luminous signalling 

• LCD screen

• Reduced harmonic distortion

• RFI filter

• Interface and communications

software: RS232/RS485

• Possibility of ample autonomy

• Automatic By-pass/ manual (20Kva)

• SNMP card optional/

RS232 Ethernet converter
• Parallel (optional)

TECHNICAL DESCRIPTION

Tamesis series units are full feature supply systems designed to supply high-

quality power on a permanent basis over a power range of  from 10 to 50 

kVA.

During  ON-LINE  operation,  the  Tamesis  range,  and  irrespective  of  the 

type  of  anomaly  in  the  mains  network,  loads  are  galvanically 

isolated and protected from all disturbances, and are provided with a 

pure, controlled and harmonics-free sinusoidal wave.

Information on the status of the system is presented locally by means of 

LED diode signalling and an LCD screen with a range of menus.

Information on the unit can also be managed remotely through its 

powerful software.

Electiricity supply anomalies: 

One problem solved

GENERAL TECHNICAL FEATURES

The Tamesis series, UPS Digital On-Line double conversion with 

galvanic insulation, from 10 to 50 kVA, offers efective solutions 

against 

electricity supply anomalies. It is designed to work with 

protect datacentres, telecom systems or any other high power 

applications.

• UPS DIGITAL ON-LINE double conversion with galvanic insulation

• Three-phase input/single-phase output

• Integral microprocessor control

• Power: 10, 15, 20, 30, 40 & 50 kVA

• Acoustic and luminous signalling 

• Reduced harmonic distortion of output signal 

• Output wave: pure sinusoidal

• Wide input voltage range 

• Protections against overloads, short-circuits & low battery voltage 

• Software included for System Monitoring

• Autonomy: from 10 min (depending on load)

• Connection ports: RS232/ RS485

• Parallel N+1 (optional) 

• LCD screen: with information about status of UPS

• Automatic By-pass / Manual By-pass (≥20kVA)