Cisco Cisco FirePOWER Appliance 7020
55-39
FireSIGHT System User Guide
Chapter 55 Using Health Monitoring
Configuring Health Monitor Alerts
For more information on health alert severity levels, see the following table.
For more information on health modules, see
.
Editing Health Monitor Alerts
License:
Any
You can edit existing health monitor alerts to change the severity level, health module, or alert response
associated with the health monitor alert.
associated with the health monitor alert.
To edit health monitor alerts:
Access:
Admin
Step 1
Select
Health > Health Monitor Alerts
.
The Health Monitor Alerts page appears.
Step 2
Select the alert you want to modify in the
Active Health Alerts
list.
Step 3
Click
Load
to load the configured settings for the selected alert.
Step 4
Modify settings as needed. For more information, see
Step 5
Click
Save
to save the modified health alert.
A message appears, indicating if the alert configuration was successfully saved.
Deleting Health Monitor Alerts
License:
Any
You can delete existing health monitor alerts.
Note
Deleting a health monitor alert does not delete the associated alert response. You must disable or delete
the underlying alert response to ensure that alerting does not continue. For more information, see
the underlying alert response to ensure that alerting does not continue. For more information, see
and
.
Table 55-5
Alert Severities
Severity
Description
Critical
The health test results met the criteria to trigger a Critical alert status.
Warning
The health test results met the criteria to trigger a Warning alert status.
Normal
The health test results met the criteria to trigger a Normal alert status.
Error
The health test did not run.
Recovered
The health test results met the criteria to return to a normal alert status, following a
Critical or Warning alert status.
Critical or Warning alert status.