Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch テクニカルリファレンス
Administration
SNTP and Time Settings
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
105
2
The following shows sample output for the command when the detail keyword is
specified.
specified.
(Switch) #show clock detail
14:49:56 IST(UTC+5:30) Sep 23 2009
Time source is SNTP
Timezone configuration: static
Time zone:
Acronym is IST
Offset is UTC+5:30
Summertime:
Summer time is disabled
14:49:56 IST(UTC+5:30) Sep 23 2009
Time source is SNTP
Timezone configuration: static
Time zone:
Acronym is IST
Offset is UTC+5:30
Summertime:
Summer time is disabled
Related Commands
SNTP Commands
You can use the following commands to configure the switch to obtain its time
settings from an SNTP server.
settings from an SNTP server.
sntp authenticate
Use this command to require server authentication for received Network Time
Protocol (NTP) traffic. To disable the feature, use the
Protocol (NTP) traffic. To disable the feature, use the
no form of this command.
sntp authenticate
no sntp authenticate
Command
Description
sntp server
Configures SNTP unicast servers.
sntp client mode
Enables SNTP client mode and sets the mode to either
broadcast or unicast.
broadcast or unicast.
clock date
Sets the date and time manually.
clock timezone
Statically sets the offset to UTC, when the DHCP option is
not used.
not used.
show sntp
Displays SNTP settings and status.