Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch テクニカルリファレンス

Link Aggregation

Cisco Small Business 200E Series Advanced Smart Switch Command Reference

199

e3

Enable        5% Disable       5% Disable       5%

e4

Disable       5% Disable       5% Disable       5%

e5

Disable       5% Disable       5% Disable       5%

e6

Disable       5% Disable       5% Disable       5%

e7

Disable       5% Disable       5% Disable       5%

e8

Disable       5% Disable       5% Disable       5%

.
.
.
e24

Disable       5% Disable       5% Disable       5%

Link Aggregation allows one or more full-duplex Ethernet links to be aggregated 
together to form a Link Aggregation Group (LAG). This allows the switch to treat 
the LAG as if it is a single physical port, with improved fault tolerance and load- 
sharing capability.

A LAG interface can be either static or dynamic.

•

Static LAG—Ports are assigned to a LAG by the administrator. The ports 
remain dedicated LAG members until configured otherwise.

•

Dynamic LAG—Ports are designated as candidates for joining a LAG, and 
form it automatically by exchanging special frames called Link Aggregation 
Protocol Data Units (LACPDUs). When formed, the LAG might include only a 
subset of the eligible ports, depending on the port number limitations for 
LAGs and other factors. When not included as a member of a LAG, a port 
functions as standalone port.

All members of a LAG must be of the same type (static or dynamic).

Enables unicast storm recovery mode for an interface or 
all interfaces.

Enables multicast storm recovery mode for an interface or 
all interfaces.

This command enables broadcast storm recovery mode 
for an interface or all interfaces.