Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch テクニカルリファレンス
Security
Dot1x
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
344
8
Syntax Descriptions
Command Modes
Privileged Exec
Related Commands
dot1x pae
Use this command to enable the authenticator or supplicant mode on the interface.
Use the
Use the
no form of the command to reset it to the default role (authenticator).
NOTE
An interface can be an authenticator or a supplicant, but not both.
dot1x pae {authenticator | supplicant}
no dot1x pae
Syntax Descriptions
Parameter
Description
interface
The interface for which to clear statistics.
all
Clears statistics for all interfaces.
Command
Description
show dot1x
Shows a summary of the global 802.1X configuration,
summary information of the 802.1X configuration for a
specified port or all ports, the detailed 802.1X
configuration for a specified port, and the 802.1X statistics
for a specified port.
summary information of the 802.1X configuration for a
specified port or all ports, the detailed 802.1X
configuration for a specified port, and the 802.1X statistics
for a specified port.
Parameter
Description
authenticator
The port must be authenticated before it permits other
nodes on the network to use the services it provides
access to. The authenticator relays supplicant requests
and credentials to an authentication server, and authorizes
or denies access to the supplicant.
nodes on the network to use the services it provides
access to. The authenticator relays supplicant requests
and credentials to an authentication server, and authorizes
or denies access to the supplicant.