Da-Lite Tensioned Large Advantage Deluxe Electrol 36925 プリント

  126" x 168" 

320 x 427 

210" 

533 

199¼" 

506 

628 

284.9

  132" x 176" 

335 x 447 

220" 

559 

208¼" 

529 

655 

297.1

  144" x 192" 

366 x 488 

240" 

610 

225¾" 

573 

708 

321.1

  162" x 216" 

411 x 549 

270" 

686 

251¼" 

638 

781 

354.3

UGGESTED SPECIFICATIONS:  

 projection screen(s), 

(H) x  

  ( W ) .   T h e   Te n s i o n e d 

Advantage

®

 Deluxe screen shall have two motors, one to operate door and one to operate screen. Door motor electrically operated 120 volt 

(60 Hz) not more than 1.2 amp. Shall have motor mounted inside the roller, to be three wire with ground, quick reversal type, oiled for life, 

with automatic thermal overload cutout, integral gears, capacitor and an electric brake to prevent coasting. To have pre-set but adjustable 

limit switches to automatically stop fabric door in the ”down“ position. The door will lift to the closed position where a micro switch shall 

cut off the electrical current to the door motor. The roller to be of 1.6" diameter aluminum. Screen motor is electrically operated 120 volt (60 

Hz) not more than 2.4 amp. Shall have motor mounted inside the roller, to be three wire with ground quick reversal type, oiled for life, with 

automatic thermal overload cutout, integral gears, capacitor and an electric brake to prevent coasting. To have pre-set but adjustable limit 

switches to automatically stop picture surface in the ”up“ and ”down“ positions. The fabric roller to be of 4½" diameter (5¾" if 270" diagonal, 

275" diagonal, or 298" diagonal) metal. Screen fabric to be seamless, flame retardant and mildew resistant vinyl, with black masking borders 

standard. Each side of the fabric to have tab guide cable system to maintain even lateral tension and hold surface flat. Custom slat bar with 

added weight maintains vertical tension on the screen surface. The ends of the slat to be protected by heavy duty plastic caps enclosing a 

preset adjustable mechanism for screen tensioning. Case shall be a white powder coated extruded aluminum. Bottom of case to be self-

trimming with a built-in flange around the bottom of the case. A section of the bottom of the case shall be a retractable aluminum door 

that opens and closes automatically with the lowering and raising of the picture surface. The balance of the bottom of the case shall be a 

second hinged aluminum door with manual opening to provide access. Hinges shall be mounted in a concealed way. Junction box shall be 

internally integrated into the housing making it possible to install the housing and wire to the building’s electrical system during construction. 

The junction box shall contain a quick connect connector that is mounted in the housing for easy plug-in connection to the motorized fabric 

and roller assembly. The motorized fabric and roller assembly to be installed in the case at the factory or at a later time at the job site. To be 

complete with integrated low voltage control unit and three position control switch with cover plate. Suitable for use in environmental 

air space in accordance with section 300-22 (c) of the National Electric Code, and sections 2-128, 12-010 (3) and 12-100 of the Canadian 

Electrical Code, part 1, CSA C22.1. Screen to be listed by Underwriters’ Laboratories.

  108" x 192" 

274 x 488 

220" 

559 

220¾" 

561 

688 

312.1

  121" x 216" 

307 x 549 

247" 

627 

246

1

⁄

2

" 

627 

764 346.5

  135" x 240" 

343 x 610 

275" 

699 

272

1

⁄

2

" 

693 

841 381.5

  146" x 260" 

371 x 660 

298" 

757 

294¼" 

747 

870 

394.6

3100 North Detroit Street

Post Office Box 137

Warsaw, Indiana 46581-0137

Phone: 574-267-8101

800-622-3737

Fax: 574-267-7804

Toll Free Fax: 877-325-4832

www.da-lite.com

e-mail: info@da-lite.com

 

10'6" x 14' 

320 x 427 

199¼" 

506 

628 

284.9

 

14' x 14' 

427 x 427 

205¾" 

523 

655 

297.1

 

12' x 16' 

366 x 488 

225¾" 

573 

708 

321.1

Extra drop may alter case dimensions. Contact Da-Lite for details.

Overall case length dimensions ±¼" (6mm).

Detail dimensional drawings, wiring diagrams and installation instructions available upon request.

Specifications subject to change without notice.

Custom formats and sizes available upon request.

  110" x 176" 

279 x 447 

208" 

528 

205" 

521 

691 

313.4

  120" x 192" 

305 x 488 

226" 

574 

222

1

⁄

4

" 

565 

729 330.7