Vision TC2-AMP2+SP-1300W プリント

REMOTE CONTROL

Full-feature remote control

is included with receivers

positioned on the front for

normal use, and on the

rear for integration with a

control system such as the

Techconnect

Control

LED DISPLAY

Clear display and a simple soft-control

interface which gives instant access to

controls. Flexible positioning of the control

interface makes this easier to install and

use than powered speakers.

INPUTS FRONT & REAR

Two Inputs are wired into the rear via

phoenix connectors. Input 1 is duplicated

on the front panel with a minijack

connector for convenience. This half-

normalled input disconnects the rear input

while in use.

RUNS COLD

Digital technology allows the amp to

squeeze into a Techconnect module.

Analogue amps produce heat as a

byproduct which limits the minimum size

of the amplifier. Digital amps run cold so

no bulky heatsink necessary.

ZERO ENERGY CONSUMPTION

Uses no power at all unless it is actually

amplifying program. Even on at full

volume, unless it is receiving input it is

effectively off. 2 X 20W (RMS @ 8 OHMS)

Massive power output is provided by the

latest low impedance Texas Instruments™

digital amplifier chip. Can drive up to four

speakers with ease.

EXTERNAL POWER SUPPLY

Laptop-style power supply with 3m DC

tail which can be shortened means easy

routing of power cable through trunking.

Velcro is included for fixing the power

supply in place, or a blank surround is

available to hide it in a standard double-

gang UK backbox.

CABLES AND BACKBOX INCLUDED

Comes with input and speaker cables,

plus a single-gang Techconnect surround

and backbox. Can alternately be

integrated into a doublegang Techconnect

AV faceplate with other input/output

modules.

WALL MOUNTED & SECURE

No furniture is required it is much less

obvious as a target for theft. Perfect

for training rooms, boardrooms, and

classrooms.

TECHCONNECT DIGITAL AMPLIFIER

“

If you have any questions just ask Dave. He’s an
installer just like you and he’ll be happy to help.
Go to www.visionaudiovisual.com/askdave

ASK DAVE...

installation:innovation