Brother HL-2460 クイック設定ガイド

OFF  ON

O

I

OFF  ON

O

I

OFF  ON

O

I

OFF  ON

O

I

2

Enter a unique your port name (ex. BLP1), 
and then click the OK button.

1

Select "LPR (Recommended)", and 
then click the Next button.

Step 5   Connect the Printer to your Macintosh

®

 & Install the BR-Script PPD file

Step 5   Connect the Printer to Your Network 
             & Install the Driver

Step 6   Configuring the NetBIOS port

Step 6   Select the appropriate printer Queue or 'Sharename'

Step 6   Configuring the LPR port

3

Specify the printer's IP Address (or 
click the Browse button to see a list of 
printers), and click the OK button.

4

Click the Finish button and restart your PC. 
After your PC has restarted, setup is 
complete.

2

Click the Next button. 

2

Enter a unique your port name (ex. 
BNT1), and then click the OK button.

3

Enter the path name (or click the Browse... 
button to see a list of printer's), and then 
click the OK button.

4

Click the Finish button and restart your PC. 
After your PC has restarted, setup is 
complete.

4

Click the Finish button and restart your PC. 
After your PC has restarted, setup is 
complete.

1

Select "LPR 
(Recommended)", and 
then click the Next button.

1

Select NetBIOS, and click the Next 
button.

For Brother 

Peer-to-Peer

 network printer users 

(LPR

- Recommended Peer to Peer printing Method

)

For Brother 

Peer-to-Peer

 network printer users 

(NetBIOS)

For 

Macintosh

®

 

users only

3

Connect the cable to your printer, and then 
connect it to a free port on your hub.  

1

Double click the BR-Script PPD 
Installer icon and then follow the 
instructions on the screen.

4

Turn the printer power 
switch on.

5

Open the Chooser from the Apple

®

 

menu on the Macintosh

®

.

6

Click the LaserWriter8 *2 icon (if you need to 
change the network zone, select which zone you 
want to use from the AppleTalk

®

 zones list).

7

Click on the appropriate print server, 
and close the Chooser. 
The setup is now complete.

*2  If the Apple

®

 LaserWriter8 Driver is not already installed on your system, you can download it from http://www.apple.com.

Turn the printer power 
switch off.

2

Step 1 to 4
Follow the instructions in the Quick Setup Guide first.

For 

Windows

®

 users  only

For 

Network shared

 printer users

5

Turn the printer power 
switch on.

4

Connect the cable to your printer, and then 
connect it to a free port on your hub.

3

Turn the printer power switch 
off.

1

Click the "Connect the interface cable 
and install the printer driver / utilities".

1

Select your printer's queue, and then click the OK button.

2

Once the appropriate queue is specified, the printer driver will be installed. 

Note: In the Chooser you will see the 
name BRN_xxxxxx_P1_AT, where 
"xxxxxx" is the last six digits of the 
Ethernet address. 
See Chapter 7 of the Network User's 
Guide for more information.

6

Click the Next button.

7

Select the "Network shared printer" or 
the "Brother peer-to-peer network 
printer", and then click the Next button. 

2

Select the Network cable.

3

Enter the printer's IP Address and the 
port name BINARY_P1, then click the 
Next button.

Note: If this screen appears, insert 
the Windows NT

®

 4.0 CD-ROM 

into your CD-ROM drive.

You can refer to the figure "Type of Network Printer" on the reverse side of 
this sheet.

Hub

Hub