Brother HL-1870N ユーザーガイド

CHAPTER 1 UNIX PRINTING 

1-4

 

Choose one of the available services (a service name will be used in step 3): 
 
BINARY_P1 Binary 

data 

TEXT_P1 

Text data (CR added) 

 
You may set up multiple print queues on your UNIX host computer for 
the same print server, each one with a different service name (for 
example, one queue for binary graphics jobs and one for text jobs). Refer 
to 

 for additional information on using services. 

 

3. Configure 

the 

/etc/printcap

 file on each host computer to specify 

the local print queue, the print server name (also called remote machine 
or rm), and the print server service name (also called remote printer, 
remote queue, or rp), and the spool directory. 

 
 
This step applies to the majority of UNIX systems, including Linux, Sun OS (but 
not Solaris 2.xx), Silicon Graphics (lpr/lpd option required), DEC ULTRIX, 
DEC OSF/1, and Digital UNIX. SCO UNIX users should follow these steps, but 
should also refer to the 

 section. Users of RS/6000 AIX, 

HP/UX, Sun Solaris 2.xx, and other systems that do not use the printcap file 
should skip to section 3-a. SCO user’s should also skip to section 3a (SCO uses 
the printcap file, but this file is automatically configured via the rlpconf 
command) 

 
An example of a typical printcap file: 
 
laser1|Printer on Floor 1:\ 
:lp=:\ 
:rm=BRN_310107:\ 
:rp=TEXT_P1:\ 
:sd=/usr/spool/lpd/laser1: 
 

Make sure this information is added to the end of the printcap file. Also make 
sure that the last character in the printcap file is a colon ":" 
 
This will create a queue named laser1 on the host computer that communicates to 
a Brother print server with a node name (rm) of BRN_310107 and a service 
name (rp) of TEXT_P1 printing text files to a Brother printer through spool 
directory /usr/spool/lpd/laser1. If you are printing binary graphics files, 
you would use the service BINARY_P1 instead of TEXT_P1.