IBM UPS 6000VA LCD 53956KX ユーザーズマニュアル
製品コード
53956KX
IBM 6000VA LCD 4U Rack UPS
2
About uninterruptible power supplies
An uninterruptible power supply (UPS) is a device that acts as a defensive barrier between electronic
equipment and incoming power problems. It conditions, regulates, and filters out power disturbances to
ensure a clean power source for IT equipment. A UPS also provides battery backup in the event of a
power failure.
ensure a clean power source for IT equipment. A UPS also provides battery backup in the event of a
power failure.
In today’s high availability server environments, unplanned power outages or line quality irregularities can
have a considerable financial impact on businesses of all sizes. The typical utility power is 99.9%
available, but that means that there can be almost 9 hours of downtime a year, not to mention brown-outs
and other power quality problems.
available, but that means that there can be almost 9 hours of downtime a year, not to mention brown-outs
and other power quality problems.
Selecting the right IBM UPS can help protect against these potentially costly incidents.
Part number information
Table 1 lists the orderable part numbers and feature codes for the IBM 6000VA UPS.
Table 1. Ordering part numbers and feature codes
Description
Part number
Feature code
IBM 6000VA LCD 4U Rack UPS (200/208V)
5395-6AX
5395-RU4 (FC 6660)
IBM 6000VA LCD 4U Rack UPS (230V)
5395-6KX
5395-RU4 (FC 6661)
IBM 6000VA UPS 3U Extended Battery Module (EBM)
69Y1984
5395-RU4 (FC 5734)
IBM LCD UPS Network Management Card (optional)
46M4110
6145
IBM LCD UPS Environmental Monitoring Probe (optional)
46M4113
6146
The UPS models include the following items.
An accessory kit containing the following items:
Front bezel
Rack mount kit with rails and hardware, including 4-post rail kit
Serial cable (3.7 m, 12 ft)
USB cable
Remote emergency power-off (REPO) connector
A documentation kit containing the following items:
Warranty flyer and Important Notices Manual
Documentation CD
Software CD, which contains IBM UPS Manager power management software
The UPS does not include an input line cord. The line cord is hard-wired to a terminal block on the rear of
the UPS. A licensed electrician will need to connect the units to a dedicated branch circuit. Circuit
requirements are listed in the
requirements are listed in the
IBM 6000 VA UPS and 6000 VA EBM Installation and Maintenance Guide
.