Elac BS 133 31259 プリント

 

1

The BS 133 JET is the ideal loudspeaker box for small and medium-

sized rooms, up to approx. 50 m². With its compact front dimensions 

of 29 x 17.5 cm, it can be built into shelves without difficulty, or can 

also be mounted freestanding on the optional LS 70 loudspeaker 
stand. With its attractive contours and the deep gloss finish of the 

baffle, this loudspeaker will immediately stand out, without taking over 

the room. You will be amazed at the scale of sound produced by this 

small loudspeaker and its ability to bring out the finest musical detail 
effortlessly.  

 

Enjoy great music with the BS 133 JET without having to be 

surrounded by cumbersome loudspeakers.  
 

 

 

 

 

 

• 

    

Strong drive and a new neodymium magnet system endow the JET 

III tweeter with incredible dynamic reserves and a high maximum 

output level. A new inner structure, and larger sound apertures, yield 

a precise upper cut-off frequency of 50 kHz.  

 

 
 

 

 

•  The 140 mm bass driver using ELAC tried-and-tested Aluminium 

sandwich technology, allow distortion-free bass response as the 

resonance of the membrane is minimised. This is due to the composite 
cellulose and aluminium construction.  

•  Due to the double 

flare design of the bass port, flow noise, even at high levels, is 

eliminated.  

 

•  A two-part bass control plug is provided that can partially or fully 

close the port, so the system can be adjusted for the room 
acoustics and speaker placement.  

 

 

 

•  As the BS 133 JET is magnetically shielded, it can be placed directly next to a 

television without affecting the picture quality.  

 

•  To improve the performance of the system the cabinet is internally reinforced in a 

way that eliminates internal standing waves and unwanted resonances. 

 

•  To optimise the sound there are individual crossover networks for the high and low 

frequencies, which can be bi-wired using two pairs of cable or alternatively, for 

optimum performance, two amplifiers can be used in a bi-amped situation. Good 
contact is guaranteed by large, gold plated speaker terminals, which are fully 

insulated to protect against short circuits.