Miele KWT 1613 SF 仕様ガイド
Page 3 of 11
Side-by-Side Merging Kit
KSK 1002
KSK 1002
Side-by-side
. . . without partition
If the appliances are installed directly
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
. . . with partition
The minimum thickness of the partition
is
The minimum thickness of the partition
is
5
/
8
" (16 mm).
If there is a partition with a thickness
from
from
5
/
8
" (16 mm) to 6
5
/
16
" (160 mm)
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
each appliance should be individually
installed within its own niche using the
mounting accessories included.
In this case, you will only need the
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
en
4
Side-by-side
. . . without partition
If the appliances are installed directly
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
. . . with partition
The minimum thickness of the partition
is
is
5
/
8
" (16 mm).
If there is a partition with a thickness
from
from
5
/
8
" (16 mm) to 6
5
/
16
" (160 mm)
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
each appliance should be individually
installed within its own niche using the
mounting accessories included.
In this case, you will only need the
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
en
4
HEATING MAT TRANSFORMER
PLUG DETAILS
PLUG DETAILS
9 foot- 120Volt- 15Amp 2-wire molded plug power
supply
•
•
KSK1002 Merging kit must be used when combining units
All Installations must be done in accordance with local codes
Specification Sheets TR 07282016
Side-by-side
. . . without partition
If the appliances are installed directly
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
. . . with partition
The minimum thickness of the partition
is
is
5
/
8
" (16 mm).
If there is a partition with a thickness
from
from
5
/
8
" (16 mm) to 6
5
/
16
" (160 mm)
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
each appliance should be individually
installed within its own niche using the
mounting accessories included.
In this case, you will only need the
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
en
4
Side-by-side
. . . without partition
If the appliances are installed directly
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
. . . with partition
The minimum thickness of the partition
is
is
5
/
8
" (16 mm).
If there is a partition with a thickness
from
from
5
/
8
" (16 mm) to 6
5
/
16
" (160 mm)
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
each appliance should be individually
installed within its own niche using the
mounting accessories included.
In this case, you will only need the
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
en
4
less than 6
3
/
4
” (160 mm)
KSK1002 Merging kit must be used when combining units
All Installations must be done in accordance with local codes
Niche depth under 25” (635 mm) will require the location
of the Electrical outlet(s) to be in adjacent cabinetry