Samsung WB350F ユーザーズマニュアル

Using Samsung Link to send files

Wireless network

Rotate the mode dial to w.

Select   → Nearby devices.

‡ If the guide message appears, select OK.
‡ The camera will automatically attempt to connect to a WLAN via the most 

recently connected AP device. 

‡ If the camera has not previously been connected to a WLAN, it will search for 

available AP devices. (p. 115)

‡ You can set to allow only selected devices or all devices to connect by 

pressing [m], and then selecting DLNA Access Control on the screen.

‡ A sharing file list is created. Wait until other devices can find your camera.

Connect the Samsung Link device to a network, and then turn on 
the Samsung Link feature.

‡ Refer to your device's user manual for more information.

On the camera, allow the Samsung Link device to connect to your 
camera.

On the Samsung Link device, select a camera to connect to.

On the Samsung Link device, browse the shared photos or videos.

‡ For information about searching for the camera and browsing the photos or 

videos on the Samsung Link device, refer to the device's user manual.

‡ Videos may not play smoothly depending on the type of Samsung Link 

device or the network condition. If this happens, re-record the video in  
640 X 480 or smaller quality and play it again. If videos do not play smoothly 
on your device over the wireless connection, try connecting the camera to 
the device with an A/V cable.

AP

Ÿ The camera is connected to a TV that supports Samsung Link via WLAN.