Samsung NX3000 ユーザーズマニュアル
127
Wireless network
Using the Home Monitor+
3
On the camera, select an AP from the list, and then position
the camera.
the camera.
•
Place the camera in a safe location where children or pets cannot
reach it.
reach it.
•
Point the camera lens at the subject.
•
We recommend you use a fully charged battery or connect the
camera to a power outlet with the AC adapter.
camera to a power outlet with the AC adapter.
4
Enter your Samsung account ID and password to log in.
•
For information about entering text, refer to "Entering text". (p. 117)
•
If you have previously logged in to the service, you may be logged
in automatically.
in automatically.
5
On the smart phone, turn on the Samsung Home Monitor+
application.
application.
Use the Home Monitor+ feature to connect the camera to a smart phone
on which the Samsung Home Monitor+ is installed, and monitor a location.
on which the Samsung Home Monitor+ is installed, and monitor a location.
•
The Home Monitor+ feature is supported by smart phones that run the
Android OS or iOS. (Some features may not be supported by some models.)
Before using this feature, update the device’s firmware to the latest version.
The Android OS must be 4.1 or higher.
Android OS or iOS. (Some features may not be supported by some models.)
Before using this feature, update the device’s firmware to the latest version.
The Android OS must be 4.1 or higher.
•
You should install the Samsung Home Monitor+ application on your smart
phone before using this feature. You can download the application from
Samsung Apps, the Google Play Store, or the Apple App Store.
phone before using this feature. You can download the application from
Samsung Apps, the Google Play Store, or the Apple App Store.
1
Rotate the mode dial to B.
2
On the camera, select
.
•
If the pop-up message that prompts you to download the
application appears, select Next.
application appears, select Next.