Samsung 300W 6.1Ch Curved Soundbar HW-J6502 ユーザーズマニュアル

  

● Before moving or installing the product, be sure to turn off the power and disconnect the power 

cord.

● If the main unit is powered off, the wireless subwoofer will be in standby mode and the STANDBY 

LED on the front will come on after the Link indicator (Blue LED) blinks for 30 seconds.

● If you use a device that uses the same frequency (2.4GHz) as the Soundbar near the Soundbar, 

interference may cause some sound interruption.

● The transmission distance of the wireless signal between the main unit and subwoofer is about 10 

meters, but may vary depending on your operating environment. If a steel-concrete or metallic wall 
is between the main unit and the wireless subwoofer, the system may not operate at all, because 
the wireless signal cannot penetrate metal.

● If the main unit doesn't make a wireless connection, follow steps 1-5 on the previous page to re-set 

the connection between the main unit and wireless subwoofer.

  

● The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water 

and moisture.

● For optimal listening performance, make sure that the area around the wireless subwoofer location 

is clear of any obstructions.