Samsung 220 W 2.1 Ch Flat Soundbar K430 ユーザーズマニュアル

 

●

Do not connect the power cord of this product or your TV to a wall outlet until all connections between 

components are complete.

●

Before moving or installing this product, be sure to turn off the power and disconnect the power cord.

ConneCTInG THe SUBWoofer

The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect wirelessly) 

automatically when the main unit and subwoofer are turned on.
•

When the subwoofer is completely connected, the blue LeD Link Indicator on the subwoofer stops blinking and 

glows continuously. The subwoofer’s LeD indicator modes are listed below:

blue 

auto-connection is complete.

blue 

blinking

auto-connection is not complete.

blue   is 

not lit

a. Is the power cord plugged into the outlet? If not, connect the power plug to the outlet.
b. If the power cord is plugged in correctly, check the Soundbar main unit.  

If your Soundbar main unit is off (in standby mode), the subwoofer will also be in standby 

mode and the blue LeD won't be lit.   

If the blue LeD light does not stop blinking when the main unit and subwoofer are turned on, please set the ID by 

following the steps below.

●

Important: Before you begin, put the battery into the remote. See page 10 for instructions.

ConneCTIonS