Samsung 220 W 2.1 Ch Flat Soundbar K430 ユーザーズマニュアル

SofTWare UPDaTe

DIGITAL AUDIO IN

(OPTICAL)

USB (5V 0.5A)

AUX IN

DC 24V

DIGITAL AUDIO IN

(OPTICAL)

USB (5V 0.5A)

AUX IN

Samsung may offer updates for the Soundbar's system firmware in the future.
If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it 

to the USB port on your Soundbar.
note that if there are multiple update files, you must load them onto the USB device singly and use them to update the 

firmware one file at a time.
Please visit samsung.com or contact the Samsung call centre to receive more information about downloading update 

files.

1.  Connect a micro USB to USB adapter cable with a male USB 2.0 micro USB plug (Type B) on one end and a 

standard female 2.0 USB jack (Type a) on the other end to the micro USB jack on your Soundbar.

2.  follow the steps below to download the product software: 

Go to the Samsung website at (samsung.com/sec)  search for the model name - select the customer support 

option (the option name is subject to change)

3.  Save the downloaded software to a USB stick and select "extract Here" to unzip the folder.
4.  Turn off the Soundbar and connect the USB stick containing the software update to the female port on a micro 

USB adapter cable.

5.  Turn on the Soundbar. Within 3 minutes, UPDate is displayed and updating begins.
6.  after completion, the power of Soundbar turns off. In this state, press the p button on the remote control for  

5 seconds.

 

●

This product has a DUaL BooT function. If the firmware fails to update, you can update the firmware 

again.