Infocus SC-PU-100 ユーザーズマニュアル
3
SETTING UP THE SCREEN
1. Rotate feet until they are perpendicular with the
case.
case.
STORING THE SCREEN
2. Release the latches and open the case cover. On the
90" and 100" models remove extending handle and
extend it as shown.
Note: Push lightly down on the center of the case to
release the latches.
90" and 100" models remove extending handle and
extend it as shown.
Note: Push lightly down on the center of the case to
release the latches.
5. Grasp the Slat Handle and lower the screen slowly
back into the case. Make sure you hold onto the handle
and keep the slat level as you lower the screen back into
the case.
back into the case. Make sure you hold onto the handle
and keep the slat level as you lower the screen back into
the case.
4. Place the end of the extending handle under the slat
handle as shown below and raise screen to desired
height. (100" model only)
handle as shown below and raise screen to desired
height. (100" model only)
6. Place the end of the extending handle under the slat
handle as shown below and lower the screen until you
can easily reach the slat handle. (90" and 100" models
only)
handle as shown below and lower the screen until you
can easily reach the slat handle. (90" and 100" models
only)
3. Pull up the screen slowly at a certain height using the
Lifting Handle then grasp the Slat handle and raise the
screen slowly keeping the slat level as you raise the
screen.
Lifting Handle then grasp the Slat handle and raise the
screen slowly keeping the slat level as you raise the
screen.