Samsung HW-J6000R ユーザーズマニュアル

The Bluetooth POWER On function is available after you have successfully connected the Soundbar to a Bluetooth 

compatible TV using TV SoundConnect. When the Bluetooth POWER On function is ON, turning the connected TV on 

or off will turn the Soundbar's power on and off as well.
1.  Connect the TV to your Soundbar using the TV SoundConnect function.
2.  Press the Bluetooth POWER button on the Soundbar remote. ON - BLUETOOTH POWER appears on the 

Soundbar's display.
•

ON - BLUETOOTH POWER : The Soundbar turns on and off when you turn the TV on or off.

OFF - BLUETOOTH POWER : The Soundbar only turns off when you turn the TV off.

 

●

This function is supported by some Samsung TVs released from 2013 on.

HDMI Cable 

(not supplied)

1.  Connect an HDMI cable (not supplied) from the HDMI OUT (TV-ARC) jack on the back of the product to the HDMI 

IN jack on your TV.

2.  Press the 

 button on the top panel of the Soundbar or the SOURCE button on the remote control to select 

the D.IN mode.

 

●

HDMI is an interface that enables the digital transmission of video and audio data with just a single 

connector.

●

If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.

●

We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose 

diameter is less than 14 mm.

●

Anynet+ must be turned on.

●

This function is not available if the HDMI cable does not support ARC.