Samsung Mono Multifunction PrinterSL-M2875FD w/Fax and Duplex ユーザーズマニュアル

Silent installation mode is an installation method that does not require any user 

intervention. Once you start the installation, the machine driver and software 

are automatically installed on you computer. You can start the silent installation 

by typing /s or /S in the command window.

Following table shows commands that can be used in the command window.

 

Following command-line are effective and operated when command is 
used with /s or /S. But /h, /H or /? are exceptional commands that can be 
operated solely.

 

/s or

/S

Starts silent installation. 

Installs machine drivers 
without prompting any UIs 
or user intervention.

/p”<port name>” or

/P”<port name>”

Specifies printer port.

 

Network Port will be 
created by use of 
Standard TCP/IP 
Port monitor. For 
local port, this port 
must exist on 
system before 
being specified by 
command.

 

Printer port name can be 
specified as IP address, 
hostname, USB local port 
name, IEEE1284 port name 
or network path.

For example:

•

 /p”xxx.xxx.xxx.xxx” in 
where, “xxx.xxx.xxx.xxx” 
means IP address for 
network printer. /
p”USB001”, /P”LPT1:”, /
p”hostname”

•

/
p"\\computer_name\sha
red_printer" or 
"\\xxx.xxx.xxx.xxx\shared
_printer" in where,  
"\\computer_name\shar
ed_printer" or 
"\\xxx.xxx.xxx.xxx\shared
_printer" means the 
network path to the 
printer by entering two 
slashes, the computer 
name or local IP address 
of the PC sharing the 
printer, and then the 
share name of the 
printer.