Samsung HW-K850 ユーザーズマニュアル

remoTe ConTroL

Turns the Soundbar on and off.

Surround Sound adds depth and spaciousness to the sound. Pressing the  

 SOUnD button repeatedly cycles through the Surround Sound settings :  

On - SUrrOUnD SOUnD, Off - SUrrOUnD SOUnD

•  on: Play sound over all the speakers.

•  off: Play sound through the original source channel.

Press the indicated areas to select Up/Down/Left/right. Press Up/Down/

Left/right on the button to select or set functions.

you can also activate the Wi-fi SetUP function by pressing and holding  

the Up button on the remote for more than 5 seconds.

you can also activate the SPK aDD function of the Soundbar by pressing 

and holding the Down button of the remote for more than 5 seconds.

Press the right button to select the next music; press the Left button to 

select the previous music.

Press and hold the right button for about 5 seconds to turn the anynet+ 

function on or off. 

(Default : On - anynet+ or Off - anynet+)  

The anynet+ function lets you control the Soundbar with the remote from an 

anynet+ compatible Samsung TV.  

The Soundbar must be connected to the TV via an HDmI cable.

Press and hold the Left button for about 5 seconds to turn the auto Power 

Link function on or off.

(Default : Off - POWer LinK or On - POWer LinK)  

Synchronizes the Soundbar to a connected optical source via the optical 

jack so it turns on automatically when you turn on your TV. (See page 22) 

The auto Power Link function is only available in the D.in mode.

you can select from 6 sound modes - StanDarD (Original Sound), 

MUSiC, CLear VOiCe, SPOrtS, MOVie, and nigHt - depending on 

the content you want to listen to.

Select the StanDarD mode if you want to enjoy the original sound.

Lets you apply dynamic range control to Dolby Digital tracks.

Press and hold the effeCt button for about 5 seconds in standby mode 

to toggle the DrC (Dynamic range Control) function On - DrC and  

Off - DrC.

●

operate the TV using the TV's remote control.