Samsung HW-K950 ユーザーズマニュアル

2.  Turn off the Soundbar.
3.  Press and hold the VOL button on the remote control for at least 5 seconds with the Soundbar turned off (off).

4.  The ID SeT message appears on the display of the Soundbar for a short period of time, and then disappears.

5.  When the blue indicators on the subwoofer and surround sound speakers blink, turn on the power by pressing  

 button on the right side of the main unit or on the remote control.

6.  When the connection is successfully established, the blue indicators on the rear of the subwoofer and surround 

speakers turn on without blinking.

  

●

If the connection process fails, the blue indicators will flash continuously. Go to Step 1 and start again.

red

on

Standby (with the Soundbar main 

unit turned off)

Check the power supply to the 

Soundbar main unit

Connection failed

Connect again 

(refer to the instructions on manual 

connection in the user manual)

Blue

on

Successfully connected  

(normal operation)

-

Blinking

Standby (with the Soundbar main 

unit turned off)

Check the power supply to the 

Soundbar main unit

Connection failed

Connect again 

(refer to the instructions on manual 

connection in the user manual)

red and blue

Blinking

malfunction

Contact the service centre.