Samsung SADT-100CM ユーザーズマニュアル
4
GB
3
Attach the 1.5" NPT Pipe (300m) to the Ceiling Mount
Adaptor and then insert the Decorative Cover. The
Decorative Cover is used for double ceiling installation to
cover the holes. Then wind Teflon tape around the 1.5"
housing screw.
Adaptor and then insert the Decorative Cover. The
Decorative Cover is used for double ceiling installation to
cover the holes. Then wind Teflon tape around the 1.5"
housing screw.
4
Install the Housing in accordance with the installation
manual.
manual.
5
After installing the adaptor, apply silicon sealant around the
adaptor and between the adaptor and the wall for water
tightness. If the wall surface is uneven, pay particular
attention that no gaps are left.
adaptor and between the adaptor and the wall for water
tightness. If the wall surface is uneven, pay particular
attention that no gaps are left.
Product Specifications
Location for use:
Indoors or outdoors
Location for use: Ceiling
External dimensions:
See the diagram
Weight:1.2 kg (including the pipe)
Suitable Temperature range:
- 40°~ 50°C
Suitable Humidity range:
0 ~ 100%
Indoors or outdoors
Location for use: Ceiling
External dimensions:
See the diagram
Weight:1.2 kg (including the pipe)
Suitable Temperature range:
- 40°~ 50°C
Suitable Humidity range:
0 ~ 100%
Accessories
1.5" NPT Pipe (length: 300m)........... 1
Decoration cover ............................... 1
Cable Gland (PG13.5)........................ 2
6
1.5" NPT PIPE
Concrete ceiling
Ceiling board
Decoration Cover
Housing
1 1/2" NPT PIPE THREAD
TEFLON TAPE
TEFLON TAPE