Samsung 120 W 2.1 Ch Soundbar HW-J355 ユーザーズマニュアル

FUNCTIONS

SOFTWARE UPDATE

Samsung may offer updates for the Soundbar's system

firmware in the future.
If an update is offered, you can update the firmware by

connecting a USB device with the firmware update

stored on it to the USB port on your Soundbar.
Note that if there are multiple update files, you must load

them onto the USB device singly and use them to

update the firmware one file at a time.
Please visit samsung.com or contact the Samsung call

center to receive more information about downloading

updates files.

●

The product has the DUAL BOOT function, if

the firmware fails to update, you can update

the firmware again.

●

Insert a USB device containing the firmware

update into the USB port on the main unit.

●

Updating firmware may not work properly if

audio files supported by the Soundbar are

stored in the USB storage device.

●

Do not disconnect the power or remove the

USB device while updates are being applied.

The main unit will turn off automatically after

completing the firmware update.

●

After reset, all settings are reset to their

factory default settings. We recommend you

write down your settings so that you can

easily reset them after the update.

If the firmware fails to update, we

recommend formatting the USB device in

FAT16 and trying again.

●

Once the software update is completed, turn

off the product and then press and hold the

( p ) button on the remote control for more

than 5 seconds. “INIT” appears on the

display and the unit is powered off. The

upgrade is complete.

●

Do not format the USB device in the NTFS

format. The Soundbar does not support the

NTFS file system.

●

Depending on the manufacturer, some USB

devices may not be supported.

HW-J355_XA_AH68-02984L_ENG-00-20161123.indd 20

2016/11/25 11:20:57