Samsung SCC-C9302P ユーザーズマニュアル

❶ Camera Operation Switches (Setup Switches)

The functions of the camera operation switches change
depending on whether the Camera is currently in the
usual operation mode (i.e., the setup menu is not showing
on the screen) or the setup menu mode.

➻

- [UP/DOWN] Directional keys: The [UP] key is used as

the ZOOM TELE switch, and the [DOWN] key is used as
the ZOOM WIDE switch.

- [LEFT/RIGHT] Directional keys: The [LEFT] key is used as the FOCUS NEAR 

switch, and the [RIGHT] key used as the FOCUS FAR switch.

- [ENTER] key: This key is used to go into the setup menu.

➻

- [UP/DOWN] Directional keys: These keys are used to move the cursor up and 

down.

- [LEFT/RIGHT] Directional keys: These keys are used to move the cursor left 

and right, or to sequentially view the values that can be assigned in each 
setup menu.

- [ENTER] key: This key is used to select a setup menu with a submenu in 

order to open the submenu, and to accept the current value.

These connectors are used to connect the power adapter cable and video input 
cable.

These connectors are used to connect an RS485 remote control cable and a 
cable used for transmitting the ALARM signal at the time of the MOTION DET 
mode.

❷ Power Input Connector and Video Output Connector (4-Pin)

❸ RS485 Connector and Alarm Output Connector (4-Pin)

This chapter explains what to check before installing the
Camera, how to choose an installation site, and what
precautions should be taken during installation.
Now, let’s install the Camera and connect cables.

00578A-SCC-C9302(F)P-E  5/18/06 9:51 AM  Page 10