Samsung SNT-1010P ユーザーズマニュアル
59
Chapter 8 Setting Up
System Configuration
58
Setting Up
To view the log information
The log information is initialized when an
SNT-1010 is restarted.
SNT-1010 is restarted.
The log information is displayed only when
the system time is set.
the system time is set.
Note
System Configuration
(Continued)
To check the connection status
Click <SYSTEM>
<STATUS>.
The Status window appears showing
the connection status.
the connection status.
Click <SYSTEM>
<S/W UPDATE>.
The Software Update window appears.
Click <SYSTEM>
<LOG>.
The Log window appears showing log
information.
information.
<Current Status> :
Shows the number of users connected to the current system and the IP addresses
of them. The connection status is updated every 5 seconds.
<System Log List> : Shows the log information about the system changes along with time and IP address.
-
<User Log In>: Shows current SNT-1010 login user.
-
<Video Configuration Change> : Shows video setting changes.
-
<System Time Change> : Shows time changes.
-
<System Start> : Shows time when the SNT-1010 is turned on.
To update the software
To download the latest version of the software, visit Samsung Electronics web site
www.samsung.com.
The update files are named such as SNT-1010-V1.1-20060531.tgz.
Software update supports update files that has predetermined file names.
Do not change the file name except the date (20060531).
Since, if the network is disconnected, the power fails or the PC abnormally operates during a software update, the system may
not work afterwards, take care not to cause a problem during an update.
not work afterwards, take care not to cause a problem during an update.
Notice
1
In the USER window, click the [Browse] button.
The Open File window appears.
2
Select an SNT-1010 update file and click the [Open] button.
3
In the USER window, click the [Install] button.
The file is uncompressed and the software update begins.
Software update may take tens of minutes.
To cancel an update, click the [Cancel] button.
Software update may take tens of minutes.
To cancel an update, click the [Cancel] button.
4
When the software update is done, the system will
automatically restart.
automatically restart.
Since the current connection is disconnected, you have to connect
to the system again.
To update the software