Samsung Digital Display Single Wall Oven ユーザーズマニュアル

ページ / 156
36  English
Maint
aining y
our applianc
e
Maintaining your appliance
Before a self-cleaning cycle
Fig. 1
Fig. 2
Don’t hand 
clean the 
oven door 
gasket.
You may 
hand clean 
the door.
• 
We recommend venting your kitchen 
with an open window or using a 
ventilation fan or hood during the self-
cleaning cycle.
• 
Remove the wire rack, broil pan, broil 
pan insert, all cookware, and any 
aluminum foil from the oven.
• 
Wipe up debris from the oven bottom. 
(Fig. 1)
• 
The silver-colored oven racks can be 
self-cleaned, but they will darken, lose 
their luster, and become hard to slide.
• 
Residue on the front frame of the oven 
and outside the gasket on the door 
will need to be cleaned by hand. Clean 
these areas with hot water, soap-filled 
steel-wool pads, or cleansers such as 
Soft Scrub. Rinse well with clean water 
and dry.
• 
Do not clean the gasket. The fiberglass 
material of the oven door gasket cannot 
withstand abrasion. It is essential for 
the gasket to remain intact. If you 
notice it becoming worn or frayed, have 
it replaced. (Fig. 2)
• 
Make sure the oven light cover is in 
place and the oven light is off.
NOTE
Remove oven racks and accessories before starting the self-clean mode.
How to run a self-cleaning cycle
1. 
Select the length of time for the self-cleaning operation, eg. 3 hours. 
Touch Self Clean 2/3/5h once for a 3 hour clean time, twice for a 5 hour clean 
time, or 3 times for a 2 hour clean time
The default setting is 3 hours.
2. 
Touch START/SET to start the self-cleaning cycle. 
The motor-driven door lock will engage automatically.
NOTE
• 
You will not be able to start a self-cleaning cycle if the Control Lockout 
feature is activated or if the oven’s temperature is too hot.
• 
The oven door locks automatically. The display will show the cleaning 
time remaining. You cannot open the oven door until the temperature 
drops to a safe/cool temperature.
3. 
When the self-cleaning cycle is done, End will appear in the display and the 
oven will beep 6 times.
How to delay the start of self-cleaning
1. 
Touch Self Clean 2/3/5h. 
Select the desired self-clean time by touching Self Clean 2/3/5h.
2. 
Touch Delay Start.
3. 
Enter the time you want the self-clean cycle to start.
4. 
Touch START/SET. 
The display will show Delay, Self clean, and the Lock icon. The motor-driven 
door lock will engage automatically.
5. 
The Self-Cleaning cycle will turn on automatically at the set time.
How to turn off the self-cleaning feature
If you need to stop or interrupt a self-cleaning cycle:
1. 
Touch OVEN OFF.
2. 
You will be able to open the oven door once the oven has cooled down for 
approximately 1 hour.
NV51K6650S_DG68-00855A-00_EN+MES+CFR.indb   36
2016-08-17     11:22:30