Samsung SL-M3065FW ユーザーズマニュアル
140
2. Using a Network-Connected Machine
Wired network setup
3
Printing a network configuration report
You can print Network Configuration Report from the machine’s control panel
that will show the current machine’s network settings. This will help you to set
up a network.
Using this Network Configuration Report, you can find your machine’s MAC
address and IP address.
For example:
•
MAC Address:
30:CD:A7:41:A2:78
•
IP Address: 169.254.192.192
4
Setting IP address
When you connect your machine to a network, you must first configure the TCP/
IP settings for the machine. The settings shown below are the basic settings
required for using your machine as a network machine. You can set TCP/IP, DNS
server, TCP/IPv6, Ethernet, and IP address allocation methods.
IPv4 configuration
•
If your device does not support a network connection, it will not be able
to use this feature (see "Machine overview" on page 18).
to use this feature (see "Machine overview" on page 18).
•
You can also set the TCP/IPv4 from control panel.
•
TCP/IPv6 is not supported by this program.
First, you have to set up an IP address for network printing and managements.
In most cases a new IP address will be automatically assigned by a DHCP
(Dynamic Host Configuration Protocol) server located on the network.
IPv4 configuration using SetIP (Windows)
Before using the SetIP program, disable the computer firewall from Control
Panel > Security Center > Windows Firewall.
The following instructions may differ for your model.
2
Follow the instructions in the installation window.
3
Connect your machine to the network with a network cable.