Samsung Smart ProXpress M4580FX Mono Multifunction (46 ppm) ユーザーズマニュアル

ページ / 383
Sending a fax
136
6. Scan & Send(Faxing)
 
When you want to cancel a fax job, tap 
(Stop) from virtual hard key 
before the machine starts transmission. Or tap Job Status from the 
home screen or Apps, select the job you want to delete (see 
You cannot send emails with the machine while it is sending a fax.
 
Sending a fax using speed dial numbers
When you are prompted to enter a destination number for your fax, you can use 
a speed dial number previously set by you.
 
1-500 can be assigned for the speed dial numbers
For one-digit speed dial numbers, press and hold the corresponding 
number on the numeric keypad on the control panel.
For two or more digit speed dial numbers, press the first digit button and 
hold the last number on the numeric keypad on the control panel.
 
Resending automatically
If the line is busy or there is no answer when you send a fax, the machine 
automatically redials the number.
To change the time interval between redials and/or the number of redial 
attempts, follow the steps below:
Tap Settings > Fax Settings > Redial on the display screen.
Delaying a fax transmission
You can set your machine to send a fax at a later time (see "General fax settings" 
 
To cancel a delayed fax, tap Off before it is sent.