Samsung 4-Door Flex RF34H9950S Series ユーザーズマニュアル

ページ / 180
English - 13
SETTING
 UP
DISASSEMBLING THE 
REFRIGERATOR DOORS
1.  With the door closed, remove the 6 screws 
holding the Top Cover (A) with a Phillips (+) 
Screwdriver, and then remove the Top Cover 
with the entire wire-harnesses attached. 
A
1-1.  Open the right door to prevent interference 
between Bracket (B) and the Top Cover.  
Hold the rear of the Top Cover, and pull it out 
to remove. (Optional)
B
2.  Separate the two connectors on the left door 
and the one connector on the right door.  
Press the white sleeve (C) of the Water Tube 
Coupler, and then separate the Water Tube (D). 
D
D
C
C
2-1.  From the right hinge, slide Pusher (E) to the 
front to remove. (Optional)
E
2-2.  Loosen the screw on the right door to remove 
the Bracket. (Optional)
Keep the removed Pusher and Bracket for 
later use.
3.  Pull up the Fixer Lever (F), and then pull it 
forward. 
F
F
4.  Remove the Hinge (G). 
G
5.  Open the door more than 90°.  
Lift it up and take it off.
6.  Repeat Steps 3 through 5 to remove the other 
Fridge door.
•  While disassembling and reassembling 
the doors, make sure that the electric 
wires are not peeled off.
•  Do not let the doors fall down.
CAUTION
DA68-03013A-15.indb   13
2016. 3. 31.   �� 11:38