Intel SR1695GPRX1AC ユーザーズマニュアル
Power Sub-System
Intel® Server System SR1695GPRX TPS
Revision
1.5
Intel order number: G11332-006
20
3.2.15 AC
Power
Inlet
The AC input connector should be an IEC 320 C-14 power inlet. This inlet is rated for
10A/250 VAC.
10A/250 VAC.
The AC power cord must meet the following specification requirements:
Cable Type
SJT
Wire Size
16 AWG
Temperature Rating
105º C
Amperage Rating
13 A
Voltage Rating
125 V
Figure 12. AC Power Cord Specification
3.3
DC Voltage Ouput Specification
3.3.1 Output
Power/Currents
The following table defines the output current ratings. The combined output power of all outputs
shall not exceed 400W @90V to 264V AC input. Each output has a maximum and minimum
current rating shown in table 3.1.
shall not exceed 400W @90V to 264V AC input. Each output has a maximum and minimum
current rating shown in table 3.1.
The power supply shall meet both static and dynamic voltage
regulation requirements for the minimum dynamic load conditions. The power supply must meet
only the static load voltage regulation requirements for the minimum static load conditions.
only the static load voltage regulation requirements for the minimum static load conditions.
Table 21. Load Rating
+12V
+5VSB
MAX
33A 3A
MIN DYNAMIC
2A 0.5A
MIN STATIC
0.5A 0.1A
3.3.2 Static
Regulation
The power supply output voltages shall stay within the following voltage limits when operating at
steady state load conditions.
steady state load conditions.
These limits do not include the peak-peak ripple/noise specified in
below table.
Table 22. Static Voltage Regulation
Output
Min
Nom
Max
Units
Tolerance
+12V +11.664
+12.150
+12.636
V
rms
+4/-4%