Intel SR1695GPRX1AC ユーザーズマニュアル
Appendix A: Integration and Usage Tips
Intel® Server System SR1695GPRXTPS
Revision
1.5
Intel order number: G11332-006
60
Appendix A: Integration and Usage Tips
Before attempting to integrate and configure your system, you should reference this section,
which provides a list of useful information.
which provides a list of useful information.
After the system is integrated with processors, memory, and peripheral devices, the
FRUSDR utility must be run to load the proper Sensor Data Record data to the
integrated Server Management subsystem. Failure to run this utility may prevent Server
Management from accurately monitoring system health and may affect system
performance. The FRUSDR utility for this server system can either be run from the Intel
integrated Server Management subsystem. Failure to run this utility may prevent Server
Management from accurately monitoring system health and may affect system
performance. The FRUSDR utility for this server system can either be run from the Intel
®
Deployment CDROM that came with your system, or can be downloaded from the Intel
®
website referenced at the bottom of this page.
To ensure the highest system reliability, make sure the latest system software is loaded
on the server before deploying the system onto a live networking environment. This
includes system BIOS, FRUSDR, BMC firmware, and hot-swap controller firmware. The
system software can be updated using the Intel
includes system BIOS, FRUSDR, BMC firmware, and hot-swap controller firmware. The
system software can be updated using the Intel
®
Deployment CDROM that came with
your system or can be downloaded from the Intel
®
website referenced at the bottom of
this page.
System fans are not hot-swappable.
Only supported memory validated by Intel
®
should be used in this server system. A list of
supported memory can be found in the Intel
®
Server System SR1695GPRX Tested
Memory List which can be downloaded from the Intel
®
website referenced at the bottom
of this page.
This system supports the Intel
®
Xeon
®
processor 3400 and Core™ i3 sequence. You
cannot use Intel
®
Xeon
®
processors not referenced on the supported processor list in
this server system.
You must use the CPU/memory air duct to maintain system thermals.
To maintain system thermals, you must populate all hard drive bays with either a hard
drive or drive blank.
You must remove AC power from the system prior to opening the chassis for service
You can download the latest system documentation, drivers, and system software from the
Intel
Intel
®
Support website at
http://www.intel.com/p/en_US/support/highlights/server/s3420gp.