Samsung 120 W 2.2Ch Micro Component MM-J430D ユーザーズマニュアル
English
15
|
•
On : The original resolution of the DVD disc will be
output to the TV direct.
•
Off : The output resolution will be fixed according to
the Resolution previously set, regardless of the
resolution of the disc.
| NOTES |
\
This will optimize the picture quality according to the
content (In the DVD disc, etc) that you want to play
and the product or your BD Wise-compliant Samsung
TV.
\
If you want to change the resolution in BD Wise mode,
you must set BD mode to Off in advance.
\
BD Wise will be disabled if the product is connected to
a device that does not support BD Wise.
Resolution
Sets the output resolution of the HDMI video signal.
The number in 480p(576p), 720p, 1080i and 1080p
indicates the number of lines of video.
The i and p indicate interlace and progressive scan,
respectively.
The number in 480p(576p), 720p, 1080i and 1080p
indicates the number of lines of video.
The i and p indicate interlace and progressive scan,
respectively.
•
480p(576p) : Outputs 480 lines of progressive
video.
• 720p : Outputs 720 lines of progressive video.
• 1080i : Outputs 1080 lines of interlaced video.
• 1080p: Outputs 1080 lines of progressive video.
• BD Wise : Automatically sets the optimal
• 1080i : Outputs 1080 lines of interlaced video.
• 1080p: Outputs 1080 lines of progressive video.
• BD Wise : Automatically sets the optimal
resolution when connected via HDMI to a TV with
the BD Wise feature. (The BD Wise menu item
appears only if BD Wise is set to On.)
the BD Wise feature. (The BD Wise menu item
appears only if BD Wise is set to On.)
| NOTES |
\
If Component or Composite is connected, the
resolution supports only 480i(576i).
\
1080P may not appear depending on TV.
Video Out Signal
Different countries apply different TV standard.You
can select from NTSC or PAL.
can select from NTSC or PAL.
• NTSC : You can set to the NTSC video format
• PAL : You can set to the PAL video format
| NOTE |
\
Depending on the type(NTSC or PAL) of main unit you
have, the TV screen displayed may be different.
HDMI Format
You can optimize the color setting from the HDMI
output. Select a connected device Type.
output. Select a connected device Type.
•
Monitor : Select if connected to a Monitor via
HDMI.
• TV : Select if connected to a TV via HDMI.
Audio
DRC (Dynamic Range Compression)
This feature balances the range between the
loudest and quietest sounds. You can use this
function to enjoy Dolby Digital sound when
watching movies at low volume at night.
• You can select either Full, 6/8, 4/8, 2/8, Off.
AUDIO-SYNC
Video and audio sync may not match with digital
TV. If this occurs, adjust the audio delay time to
match the video.
match the video.
• You can set the audio delay time between 0 mS and
300 mS. Set it to the optimal status.
Speaker Selection
The audio signals transmitted over the HDMI Cable
can be changed Audio System/TV Speaker.
can be changed Audio System/TV Speaker.
•
Audio System : Video is transmitted over the HDMI
connection cable only, and audio is
output through the product speakers
only.
•
TV Speaker : Both video and audio signals are
transmitted over the HDMI connection
cable, and audio is output through your
TV speakers only.
| NOTES |
\
The default setting of this function is Audio System .
\
HDMI Audio is automatically down-mixed to 2ch for TV
speakers.
\
When TV Selection is set to TV Speaker, EQ/POWER
BASS/Recording/MY KARAOKE/VOL/MUTE doesn't
work.
\
With Speaker Selection set to 'TV Speaker', the
volume can be adjusted only using the TV remote
control.
02876J MM-J430D-XA-ENG-20150918.indd 15
2016/2/3 19:09:36